|
Make sure the scalp is dry and that the skin is healthy and
intact. The method of application depends on the type of disposable
applicator used:
A. Pump spray applicator:
1. This applicator works best for applying Rogaine to large
areas of the scalp.
2. Remove large outer cap; remove small inner cap and discard
it.
3. Insert the pump spray applicator into bottle and screw
on firmly.
4. After aiming the pump toward the center of the bald area
of the scalp, press the pump once and spread Rogaine with
fingertips to cover all of the bald area. Repeat for a total
of 6 times, to apply a dose of 1mL of solution. Avoid breathing
spray mist. Place large outer cap on bottle when not in use.
B. Extended spray-tip applicator:
1. This applicator works best for applying Rogaine to small
areas of the scalp, or under hair.
2. The pump spray applicator must be on the bottle to use
the extended tip applicator. Follow steps A.2 and A.3.
3. Remove small spray head from top of pump spray applicator;
fit the extended spray tip applicator onto the spray shaft
and push down firmly. Remove the small cap on the end of the
extended tip.
4. After aiming the applicator toward the center of the bald
area of the scalp, press the pump once and spread Rogaine
with fingertips to cover all of the bald area. Repeat for
a total of 6 times, to apply a dose of 1mL of solution. Avoid
breathing spray mist. If desired, replace the small cap on
end of extended tip when not in use.
C. Rub-on applicator:
1. This applicator works best for applying Rogaine to small
areas of the scalp.
2. Remove large outer cap; remove small inner cap and discard
it.
3. Insert the rub-on applicator into bottle and screw on
firmly.
4. Holding the bottle upright, squeeze the bottle once to
fill the upper chamber to the black line. The chamber now
contains one full dose ( 1mL of solution ).
5. Holding the bottle upside down, rub the applicator on
the scalp to cover all of the bald area, until the chamber
is completely empty. Place large outer cap on bottle when
not in use.
|
